You are here:
News
News
Silent Check Valve (Yes or No)? 2010-11-18
I have an 8" check valve that I need to replace that is in the vertical plane 11" from the discharge of a 1435 gpm pump.
Check valve at floor control valve 2010-11-17
What is the purpose of the check valve in Figure A.8.17.5.2.2(b)?
Short Body Check Valve 2010-11-17
I need a 42 inch swing check valve for raw sewage service. Due to piping limitations, I am looking for a short body (suc
Valve availability B16.47 series B ends 2010-11-17
This was sent out for RFQ from valve vendors to which at least one of them responded that this would be a very long lea
disc and seat material for globe valve 2010-11-17
Every body can tell me if globe valve disc and seat are 13% chrome steel. It can be stellite or it doesn't need stellit
1/4" Plastic Normally Open Solenoid Valve 2010-11-03
This is a little different to many of the valves discussed here, but I am sure someone has had experience with these.I r
What is disk facing valve and vavle body seat ring (gate valve) for? 2010-11-03
I am doing a analysis of the component in the gate valve and this two ring confuse me. Seat ring: ring forming a seat, e
valve for a DIY motorized valve control 2010-11-03
I've built a small ucontroller based motorized valve which uses a stepper motor to drive a valve (small, 1/2" valve). Th
