Check Valve Series

Product drawing»

Structural drawing»

You are here: News > News Detail

Yi Pump Valve H44H-16C Swing Check Valve Dimensions and Technical Data

2026-11-18

The technical parameters are as follows. Nominal pressure is PN1.6 MPa. The working pressure range is 1.6 to 25 MPa across the PN16 to PN250 series. The applicable temperature is up to 425 degrees Celsius. The applicable media are water, steam and oil products. The body material is carbon steel and the seat material is carbon steel with a welded iron based alloy. Stainless steel variants in the same H44H family extend service to 550 degrees Celsius.The main check valve product names of China Check Valve Network include:Energy-saving Muffler Check Valve,Flange Silent Check Valve,Wafer Silent Check Valve,Chute Rolling-ball Check Valve,Flange Swing Rubber Disc Check Valve,Oversized Silent Check Valve,Flange Ball Check Valve.

Dimensions are given in millimeters. L is the face to face length. D is the flange outside diameter. D1 is the bolt circle diameter. D2 is the raised face diameter. b is the flange thickness. H is the total height. For DN25, L 160, D 115, D1 85, D2 65, b 16, four 14 mm bolt holes and H 100. For DN32, L 180, D 135, D1 100, D2 78, b 16, four 18 mm bolt holes and H 105. For DN40, L 200, D 145, D1 100, D2 85, b 16, four 18 mm bolt holes and H 115. For DN50, L 230, D 160, D1 125, D2 100, b 16, four 18 mm bolt holes and H 135. For DN65, L 290, D 180, D1 145, D2 120, b 18, four 18 mm bolt holes and H 142. For DN80, L 310, D 195, D1 160, D2 135, b 20, eight 18 mm bolt holes and H 165. For DN100, L 350, D 215, D1 180, D2 155, b 20, eight 18 mm bolt holes and H 180. For DN125, L 400, D 245, D1 210, D2 185, b 22, eight 18 mm bolt holes and H 210. For DN150, L 480, D 280, D1 240, D2 210, b 24, eight 23 mm bolt holes and H 233. For DN200, L 500, D 335, D1 295, D2 265, b 26, twelve 23 mm bolt holes and H 304. For DN250, L 550, D 405, D1 355, D2 320, b 30, twelve 25 mm bolt holes and H 348. For DN300, L 650, D 460, D1 410, D2 375, b 30, twelve 25 mm bolt holes and H 390. For DN350 and DN400, L is 750 and 850, with H 430 and 468.

The L value governs the space between mating flanges. The D, D1, D2 and b values define flange compatibility, while H determines vertical clearance for the swing disc and bonnet. The swing design permits horizontal or vertical mounting, provided vertical pipelines carry flow upward so gravity assists disc closure. For Yi Pump Valve orders, this dimension reference is a selection baseline. The official outline drawing should be requested to confirm tolerances, face finish and marking before fabrication.

Do you still need to know or purchase the following check valve products:

 Kaiweixi Valve Group Co., Ltd.
Kaiweixi check valve Contact Kaiweixi
Zhejiang Shanliu Valve Technology Co., Ltd.
Shanliu Check Valve Contact Shanliu
Shanghai FengQi Industrial Development CO., Lid.
FengQi Check Valve Contact FengQi
Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi check valve Contact MeiYan Yi